Reply To: M1XEP Unable to Connect Via Network Connection

[Stephen Schwarz]

Hi again, I was using ElkRP2 software 2.0.40 and the M1XEP is at 2.0.34. I ended up unplugging the RS232 cable from the M1XEP, then I unplugged the backup battery and power cycled the M1G. After plugging the M1XEP back in and plugging the power back in, the M1XEP came back to normal operation. I was able to connect from the ELKrp2 software and notifications started to send again.

Thank you