› M1 Support Forum › Using ASCII protocol ARM disarms immediately

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 30, 2024 at 5:37 pm #8044
    Glenn Waters

      I’m having a problem when using the ASCII interface to ARM. The ARM Away message is sent, the panel arms and then immediately disarms. I’m figuring that it is some Area or Zone setting, but cannot really figure out what could cause this.

      This is the debug log showing the arm message being sent and then the messages that are received. I have added commentary to some of the messages.

      Thanks for any help!

      Arm away, area 1
      2024-05-29 08:44:51.557 DEBUG (MainThread) [elkm1_lib.connection] write_data ‘0Da11XXXXXX0035′

      Valid user code, user 007
      2024-05-29 08:44:51.631 DEBUG (MainThread) [elkm1_lib.connection] got_data ’17IC000000000000007010074’

      Log data, event 1173 (area armed), user 007, area 1
      2024-05-29 08:44:51.837 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘1CLD1173007108450529000424003D’

      2024-05-29 08:44:51.838 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘1EAS000000001111111100000000000E’
      2024-05-29 08:44:51.838 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘0CAM000000007F’
      2024-05-29 08:44:51.838 DEBUG (MainThread) [elkm1_lib.connection] got_data ’17IC000000000000007010074′

      Arming Status
      2024-05-29 08:44:51.839 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘1EAS 10000000 41111111 00000000 000A’
      2024-05-29 08:44:51.839 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘0CAM000000007F’

      Log data, event 1174 (disarmed)
      2024-05-29 08:44:51.839 DEBUG (MainThread) [elkm1_lib.connection] got_data ‘1CLD1174007108450529000424003C’

      May 31, 2024 at 10:21 am #8050
      Glenn Waters

        Just to add: M1G. Hardware: 0.11 Boot: 3.3.6 Firmware: 5.3.14

        May 31, 2024 at 11:53 am #8051
        Brad Weeks

          Do you have any Rules related to Arm / Disarming? If you Arm from the M1 keypad does the system immediately disarm? Are you integrating with any Integration Partners (Crestron, Control 4, AMX, Elan, RTI, UTC, etc.) ? What interface is sending the ASCII string to the M1?

           

          What is the Firmware in the M1XEP?

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.
        Scroll to Top