E27 Alarm Engine Control Board

ELK-E27CB

ELK’s E27 Alarm Engine® is a hybrid alarm control for intrusion & safety, supporting both hardwired & wireless sensors.  An on-board Ethernet port & optional Wi-Fi adapter provide secure connectivity with multi-layered authentication & encrypted communications.

E27 offers powerful automation with simplified scheduling & a robust rules engine for unrestricted customization.  Easy integration with Z-Wave devices provides convenient automation & real-time control of lights, thermostats, & locks.

NOTE: E27 BOARD ONLY!  POWER SUPPLY NOT INCLUDED.
See Specifications for Details.

E27CB-front-view

Product Details

  • Large zone capacity: 16 on-board zones expandable to 128
  • Wireless capability: Up to 128 zones, maximum of up to 5 receivers/transceivers total
  • Areas/partitions: Up to 8
  • Users: Up to 199
  • User groups: Up to 10
  • On-board Outputs: 2 Alarm Outputs, 1 form "C" relay and 10 voltage (12VDC, 50mA) outputs
  • Z-Wave Support: 64 Lights, 8 Door Locks, 4 Thermostats, 4 Garage Doors
  • On-board Ethernet port, Wi-Fi Support with optional Wi-Fi adapter
  • Flash Memory - Allows field updates to firmware electronically
  • Supports 4-wire (any input) and 2-wire (inputs 14, 15, & 16) smoke detectors
  • Includes fire alarm verification routine
  • Plug-in terminal blocks make service and pre-wires a snap!
  • Hardware "watchdog" and nonvolatile EEPROM memory
  • Requires ELK-P1426 14VDC 2.6 Amp Power Supply **NOT INCLUDED**

Communications

  • Built-in IP reporting to Central Monitoring Station
  • Optional Digital Dialer for landline or cellular dial capture communications to Central Station
  • Email, SMS, and push notification to users

 

Automation & Integration

  • Create lifestyle enhancing comfort, convenience and security
  • Powerful new engine with AND, OR & ELSE logic
  • Rules utilize easy to understand text based references
  • Sunset/Sunrise calculation and activation
  • Control Z-Wave devices including lights, locks, thermostats, and garage doors
  • Control almost any electrical device with relays

Power Supply

  • 2.5 Amp power supply with master power switch and low battery disconnect
  • 2 auxiliary power outputs (1 Constant and 1 Switched)

Resources

  • E27 Alarm Engine Control Board with terminal blocks
  • Hook up Diagram mounted on E27 Plastic Housing
  • 2 Mini Jumpers
  • 3 820 Ohm Resistors
  • 18 2200 Ohm Resistors
  • 4 8/32 Shoulder Screws
  • Relay Adapter 12 Conductor Cable Assembly
  • Instructions

Locate an ELK Authorized Distributor Near You!

For more infomation, call ELK at (800) 797-9355.

Scroll to Top